P1000

After a year with the P1000 shared by two drivers, recommends them with the spring kit and haptics; the elastomers didn't last or feel good.

Has used the P1000 pedals for over a year with no intention of switching; likes that they can be upgraded with hydraulics, haptics and spring kits.

Went from Simagic P1000 pedals they didn't like to SR-P GT-R pedals.

Hasn't had a single issue with their non-hydraulic Simagic P1000s.

Their Simagic P1000s broke when the load-cell contact point sheared, and the warranty process was lengthy.

Uses Simagic P1000s and absolutely loves them, after Fanatec CSL Elite V2s.

Finds Simagic P1000 pedals great and solid with a performance spring kit, and the haptic reactor adds the cherry on top.

Loves their Simagic P1000 pedals paired with an Alpha base.

Loved using their hydraulic P1000s but is getting rid of the hydraulic setup as it adds no real difference in feel.

Uses hydraulic Simagic P1000s at about 60 kg and likes the damped, very progressive feel; the clutch feels good too and they look great.

Found the P1000s very decent pedals, but sold them because the base plate flexed noticeably under their heavy braking.

Has put about 600 hours on Simagic gear in a year without a single issue, apart from the P1000 pedals being loud and squeaky at times.

Their P1000's load cell stopped working after a house move, so they switched the brake to its built-in hall sensor with one click in the software. At 3.3k iRating, ran Long Beach within about 1.2% of the reference pace with consistent laps and a clean race, and says they wouldn't have noticed the difference.

Built a rig this year with P1000 pedals, springs and haptic motors, racing F1 leagues, LMU, AC Evo and iRacing. Can't use one brake setup across cars, struggles with non-ABS cars, and hates swapping springs, so leaves one setup and adapts their braking.

Owns P1000 pedals and calls them great, but says Simagic's software has issues.

Contacted Simagic for a replacement pedal for their P1000 and got a reply within hours, with the part shipped within a day.

Switched to Simagic mainly for the pedals and wheel options, and loves the P1000 pedals.

Has run P1000 pedals with Simagic's hydraulic brake add-on for about a year with no issues or maintenance; finds the hydraulic version feels slightly better.

Had P1000 pedals with the hydraulic brake before replacing them with a MOZA mBooster, which they find quite a bit better.