Quick note: Some links are affiliate links. We earn a tiny commission if you buy (at no cost to you). Keeps the lights on!

wheelbase
Fanatec

CSL DD 8 Nm

Category
Wheelbase
Type
Direct drive
Torque / brake force
8 Nm
Platforms
—
Notes
—

What drivers keep saying · from 16 reviews

detailed force feedback4durability issues4strong force feedback4great value2bad software1quality control issues1

Has used their CSL DD 8 Nm with the WRC wheel and QR Lite with zero complaints.

positive

Their CSL DD had to go for repair when force feedback kept failing, though with the boost pack they were happy with its detail and feel.

mixeddurability issues

Was perfectly happy with their 8 Nm CSL DD before a near-free DD+ upgrade.

positive

Owns the CSL DD 8 Nm with no regrets: force feedback is plenty and very detailed.

positivedetailed force feedback

Has used the CSL DD 8 Nm for almost three years with no regrets; later upgraded from CSL load cell pedals to Sim-Lab.

positive

Has had the CSL DD for nearly two years and finds 8 Nm plenty, running 60-70% for track driving.

positive

Has a CSL DD with the boost kit but finds its quick release awful.

negative

Finds their CSL DD 8 Nm brilliant for drifting and rally, though a bit more torque would let them run lower force feedback with more road detail in ACC.

positive

Has run the CSL DD 8 Nm for about 2.5 years; the combo was unbeatable for the price, but the plastic quick release feels like a prototype that breaks too easily and the plastic table clamp is poor.

mixeddurability issues

Went from a G923 on a table clamp to a CSL DD with the boost kit in an aluminium chassis and finds it mind-blowing.

positivestrong force feedback

Had a CSL DD 8 Nm and sold it: compared with Logitech it was problematic, with less torque and less plug-and-play.

negative

Owns a CSL DD 8 Nm alongside Simagic and MOZA bases and rates the Fanatec as meh in comparison.

negative

Has the CSL DD 8 Nm Ready to Race bundle with the load cell upgrade and no real complaints apart from the budget QR1 Lite quick release.

positive

Switched from a ClubSport V2.5 to the CSL DD 8 Nm and regrets it: even maxed it never matches the V2.5's power, gives less road detail, more cogging, cheap plastic build and a long axle with play.

negativedurability issues

Has a CSL DD 8 Nm that has been totally fine, with no quality or operational issues.

positive

Owns a CSL DD with the boost kit and was never disappointed; the QR1 Lite is poor and the wheel isn't perfectly straight at rest.

positive

Has owned the CSL DD 8 Nm for four years in iRacing and is super happy: it translates the car extremely well, letting them be smooth enough to race top-split GT3 at 3.5k iRating.

positivedetailed force feedback

Has used a CSL DD 8 Nm for about 1.5 years; trying an Invicta 27 Nm offered nothing memorable beyond slightly more smoothness.

positive

After three years on a G29, finds the CSL DD with the 8 Nm kit sublime: smooth, silent and torquey, with differences that feel subtle on track but add up.

positivedetailed force feedback

Their two-year-old CSL DD 8 Nm failed when the main shaft came loose, and they switched to Asetek.

negativedurability issues

After upgrading their CSL DD to 8 Nm with the boost kit, force feedback feels much better; at 5 Nm it felt elastic.

positivestrong force feedback

Has run their CSL DD with the 8 Nm boost kit for two years without issues, and found Fanatec's customer service good.

positive

Finds the 8 Nm CSL DD weak and unsatisfying, weaker than their old CSW 2.5; it can't produce solid endstops, so they kept losing the wheel in rally recoveries.

negative

Did the power supply upgrade on their CSL DD and says going from 5 to 8 Nm feels like more than the 3 Nm difference.

positivestrong force feedback

Hasn't updated their CSL DD 8 Nm firmware in over a year and has had zero issues with any game, though they'd pick Simagic EVO today.

positive

Has the 8 Nm CSL DD and complains of firmware issues, continued bugs, weak support and the awkward connection sleeve.

negativebad software

After a month with a CSL DD and 180 W boost kit, following DFGT, G27, CSL Elite and CSW 2.5, says it is probably the last wheelbase they'll ever buy.

positive

Owned a Fanatec CSL DD 8 Nm for years with no real complaints apart from a slight clunk from the quick release and comparatively low power; it never failed.

positive

Moved from a Fanatec CSR to an 8 Nm CSL DD and found the difference very noticeable.

positive

No issues with their Fanatec CSL DD 8 Nm after almost two years: never overheated or lost centre.

positive

Has had the Fanatec CSL DD 8 Nm for some time and finds it a massive step up from a G29.

positive

Their CSL DD 8 Nm felt good, with bumps and tyre contact patch subtleties, but a little flat compared with real life.

mixed

Went back to their Fanatec CSL DD 8 Nm after trying a Simagic EVO: silent and still fantastic, especially with the latest full-force update.

positive

Used a Fanatec CSL DD 8 Nm for four years but had a lot of clipping.

mixed

Upgraded from a G29 to a Fanatec CSL DD 8 Nm and was blown away by how much better it was.

positive

After buying a CSL DD 8 Nm in 2023: the QR1 has a lot of play and makes noise, the base gets very hot in stints over 30 minutes and FFB goes numb when hot, with occasional clipping.

negativequality control issues

Their CSL DD 8 Nm never had QR1 play issues and always ran pretty cool.

positive

Upgraded from a Thrustmaster T300RS to a Fanatec CSL DD with boost kit and load cell pedals; says it is night and day, and the boost from 5 to 8 Nm is when they truly felt it.

positivestrong force feedback

Went to a Fanatec CSL DD at 5 Nm and later upgraded to 8 Nm; finds direct drive a new world, with far more detailed, accurate force feedback and no clipping, and 8 Nm the real deal.

positivedetailed force feedback

Has run a CSL DD with the 8 Nm boost kit for a couple of years with no interest in replacing it; only one in-race disconnect over hundreds of hours.

positive

Was perfectly happy with their 8 Nm CSL DD and would have been content with it for life; moved to an 18 Nm VNM and gets a better feel for the track.

positive

Runs their CSL DD at 8 Nm with the boost kit and feels 8–10 Nm is the closest to real road cars, a clear step up from 5 Nm and from a G29.

positive

Going from a Thrustmaster T248 to a Fanatec CSL DD 8 Nm was night and day, though a 20 Nm Podium DD1 later added far more feeling and detail.

positive

Sent back a CSL DD 8 Nm after a week because it clipped quite badly at times, which they couldn't unnotice once they had.

negative

Has a CSL DD 8 Nm and finds their bundle (McLaren wheel, load cell pedals, 8 Nm upgrade) amazing price to performance.

positivegreat value

Runs an 8 Nm CSL DD with Simsonn pedals and calls it a great budget setup, but finds Fanatec's customer service and communication terrible.

mixed

Recently put together an aluminium profile rig, a CSL DD 8 Nm bought for £320 and Simsonn load cell pedals. After 15 years in the hobby, says the quality and driving experience for that money is something they could never have dreamed of.

positivegreat value